Old Blacksmith’s Forge from Tabletop World

Finally managed to snap some pictures of my old Blacksmith’s Forge from Tabletop World. This is their second version of a Blacksmith and is sadly no longer available. This was one of those do-it-yourself kits that took 10 hours to assemble, using hot water for bended parts (mine even arrived with broken pillars) and gluing the thing together.

This was my 3rd Tabletop World building and the first one where I didn’t paint interior, since lifting the roof included lifting the pillars on the stairs, and they were so fragile that I glued to whole thing together.
The older models included a bunch of furniture and accessories, so those were used for a lot of different projects! The new easy-assemble models are much less of a headache but doesn’t come with furniture and accessories. Which is totally fine by me :-) I really prefer the new models “assembling-wise”.

Since this was my 3rd painted Tabletop World building, a lot has changed since then! I probably would have painted it different now, but I rarely repaint my old painted terrain as it’s also fun to see how much I have progressed.

It might be hard to see it from the picture, but Tabletop World’s buildings were a whole lot larger back then. Somewhere down the line, the buildings shrunk to a 25mm scale (tops) for miniatures which is a shame, but they still look awesome :-) I actually started out with painting the interior of the rather new Town Gate, but the miniatures looked like giants and even without base they were still atleast a head taller than the doorways! You don’t notice that at all from the outside though! Which is why I usually resort to gluing everything together.

Only exception is the Guard Tower (it’s an old DIY kit that they revived as an easy-to-assemble version) I painted the interior of the wooden floor (the one with arrowslits) and furnished it with armor and weapon racks. But again, it’s an old model and the scale of that one is 28-30mm.

Townhouse from Tabletop World

For some reason I never got around to make a post about the Townhouse from Tabletop World, even though the house has been up on Coolminiornot.com for quite a while. So here is a late post about the awesome small but detailed building :-)

Townhouse

The pigs in the picture are from Lead Adventure and are very cute! One is a female and the other a male (they have detailed lady and gentleman parts!) The house is one of the easy assemble ones. It comes in only two parts with detailed interior. As usual I chose to glue the thing together, since it’s rather hard to furnish properly (proportionally it’s the size of a small shed or outhouse) :-P

It only took me a day to paint this as there were few demanding details (I had already painted Mr and Mrs Pig) so I’m quite proud of the result! This was painted shortly after the Coaching Inn, so I repeated the red roof on this one. I have tried to mix the roof colours so it doesn’t look too messy on the game board, but it isn’t as easy as it looks. Still have too many blue roofs! (Town Gate and Guard Tower each have a blue roof)

Stay tuned for more Tabletop World buildings!

Tabletop World’s Townhouse III – Spooky House Edition!

As mentioned in a previous post I wanted to make my own version of a spooky house. I was inspired by an old Ravensburger boardgame (one I had as a kid) and since I have 2 of Townhouse 3 lying around I figured it was worth an experiment :-D

Tabeletop World - Spooky House

The trees are 4 Ground’s Mature Fir Trees which has been put to good use for our sessions. The dead tree is from Tabletop World. The cute log pile is from Ristul’s.

I painted it mostly in dark brown colours starting with Muddy Soil from Reaper paints and highlighting my way up to Dark Shadow and Brown Sand. The reds are Clotted Red and highlighted with Mahogany Brown also from Reaper. My husband added some moss tufts in recesses of the roof.

Here are a few more pictures. I included the Mordheim Witch to the pictures as she fits right in! Which/Witch :) reminds me that I need to put her up on the blog with her own post!

The Old Timbered House from Tabletop World

I recently posted pictures of the old Merchant’s House and I remembered I was still missing this old timbered house from Tabletop World.

The house is long out of production as it was one of those assembly kits with tons of small bits you had to glue on yourself, including the infamous roof sections, which was madness to both assemble and making the roof suitable for easy access to the full furnished interior.

I am really proud of the result despite painting it years ago. Just like the Merchant’s House, I have never used the interior for gaming sessions.

Timbered House 1

Added some trees and some of my warepiles for the picture aswell as the cute pile of logs from Ristul’s Extraordinary Market’s Bonfire Set. I can highly recommend everything from their miniature range!

More pictures of the exterior including a noble citizen!

It was a bit hard capturing the mood inside the building as it is really hard to get a decent camera position, but here is a good view into the cottage!

Timbered House Interior

Phew, still missing quite a few buildings from my Tabletop World collection. Let’s see if I can take some pictures of my newly finished Town Gate sometime soon :-)

Merchant’s House by Tabletop World

This is the out of production Merchant’s House from Tabletop World that I painted a few years ago.

Merchant's House

I added some scenery items from Fenryll and Grendel plus a few of my vintage Citadel miniatures for size comparison. It has been a few years since I painted this piece, and as described in earlier posts, this one was an absolute pain to assemble!

The building was the first I ever painted from Tabletop-World and it took me weeks to assemble and paint. The roof was terrible and I hated it so much that I wanted to smash it into a milion pieces, but I finally glued it together (after struggling with the pieces in hot water an entire afternoon to make them fit) The ornaments on the roof were broken at arrival, so unfortunately they are missing.
The result however, was absolutely stunning! And I went on buying several other buildings (with just as much swearing and cursing!) before they finally made their buildings consumer friendly (Yeah, I’m lazy!)

The roof is removable and the inside is fully furnished with bed, desk and chairs. It is such a romantic piece ;)
This and the Timbered House were the only ones I actually furnished (rest is glued together) as we’ve never used it in our RPG sessions.

Still missing a quite a few posts from my collection; Timbered House, Blacksmith’s Forge (the old one), Guard tower, Town House, Water Well and Stone Bridge. Which are all done, but I haven’t taken any pictures yet! Stay tuned for that!

And in the works are: Townhouse II & III x 2, and the Town Gate :-)

Tabletop-World: Mansion

This is the wooping large Mansion from Tabletop-World. A really large building and the tallest house I own (not counting the watch tower or town gate) I added some of my warepiles to the picture for a little flavour and size comparison :)

Tabletop-World Mansion
The building is in 3 floors with a huge roof and a cute spire. I did the unthinkable and glued every section together as I knew I would never actually use the interior of the building. The size is realistic but hardly any furniture I own except Tabletop-World’s own pieces fit inside, plus the building easily get worn down and chipping paint when continously being pulled apart.
Another reason for this is because I use it for RPG’s and Mordheim. When several people move the buildings with loose sections around, accidents are bound to happen as it is pretty unpredictable where the sections are combined to the different pieces. Only 2 of the Tabletop-World buildings I own have fully painted interior and so far never seen the light in any sessions.

Tabletop-World Mansion 1

The spire bronze-roof is actually the only part of the paint job I am not 100% satisfied with. I think I would paint the bronze a bit darker next time as it blends in with the wood colours.

I didn’t glue the spire roof together for limited space reasons as it is quite a tall building. Unfortunately, the spire looks a bit crooked on the pictures. Most likely because it wasn’t adjusted properly that day.

I was quite happy with the rest of the building, although I absolutely dreaded painting all those windows. Never painted that many before! Atleast they turned out OK :-)

Still a really cool building and it looks awesome on the gaming table! :-D

Tabletop-World: Blacksmith Forge

This is the newest Blacksmith Forge from Tabletop-World. By newest I mean that this is actually their 3rd version of their blacksmith building. I am fortunate enough to own the 2nd edition aswell which is a whole lot different and much larger than this.

Tabletop-World Blacksmith

It was easily assembled (their new models are great!) and I’m glad I made my old Blacksmith (the 2nd edition) look more like a house or bakery as I wanted it to be up to each session which kind of building it resembled. Else there would be quite a competition in the village!

Tabletop-World: Cottage

This is the cottage from Tabletop World. Another of those newer buildings which require almost no assembly (which is a big plus for me as the old ones were a b#*@% to assemble)

This time I tried out a more cozy orange colour for the windows instead of the traditionally blue, which also looks really cool but a bit trivial. I was afraid that it would look like the house was on fire, but I think it turned out perfect! Added to the picture is the dead tree from their catalog and one of my many warepiles :)

I was actually inspired by a very old version of the Memory game from Ravensburger I had when I was a kid. One of the tokens were of a timbered house with orange windows and a black roof. Really spooky and I absolutely loved it! I am currently painting their “Townhouse III” in those colours and it will most likely stand out, but i’ve really enjoyed painting it so far!

Tabletop-World: Coaching Inn

This one is the Coaching Inn from Tabletop-World and at the time of purchase (2013), the largest house they ever made. In 2014 however, they made an even bigger Mansion and finally in 2015 they added the Town Gate which is enormous! Wonder how 2016 will look!

I actually painted this one twice because I thought it would look cool with red patterned stones instead of standard grey. Boy, was I wrong! The whole thing looked like a big mess! So I decided to start over and try again with the standard grey theme. Looked a lot better :) Also added some of my many warepiles for extra flavour!

Still it is a fragile building (especially the balcony railing, which miraculously survived the trip from Croatia) and I shiver every time one of my friends tries to use the balcony in Mordheim!

The Tabletop-World Gate

Early Christmas present!

I was supposed to open it Christmas eve,  but with the kids running around high on sugar canes, I thought the most responsible thing would be to open it early (and I was way too excited to wait). I was worried about how it would handle the transport home as well. But when I opened it, it actually turned out less fragile than anticipated. Oh well.. :-)

Good thing I still get to open 2 more buildings from Tabletop-World Christmas eve !

The building is MASSIVE! and as you can see, I’m still behind on the tower and townhouse… In 3 days I’ll have 5 unpainted tabletop world buildings taking up space in my already tiny apartment! So much to paint and so little time!

Tabletop-World Gate

Tabletop-World Gate #2